NFD-Special Modified Plastics | Special Plastics | The Professional Manufacturer of Nano-Antibacterial Plastics

SEARCH|JOIN US|LANGUAGEZH | EN  

Home > MEDIA > COMPANY NEWS
< BACK

good news! NFD carbon fiber composite plastic achieves a major breakthrough!

2020-01-08 11:34:17

High-performance carbon fibers from western countries have been restricted from exporting to China, and composite carbon fiber materials that can be used for military purposes have been strictly controlled. Limited by comprehensive factors such as technical conditions in China, coupled with backward formula design and production technology, the development of high-performance carbon fiber composite plastics is very slow. As high-performance carbon fiber composite plastics have been monopolized by foreign giants for a long time, high-performance carbon fiber composite plastics are expensive and difficult to purchase. Domestic companies often encounter situations where there is money and no materials. Therefore, Jiangsu Xinfuda Composite Materials Co., Ltd. (NFD) focused on the development of carbon fiber reinforced composite materials. After two years of technical research, technicians successfully developed high physical strength, high heat resistance, high wear resistance, chemical resistance, Compared with carbon fiber reinforced engineering plastics imported from abroad, the high modulus carbon fiber reinforced plastics show that the performance strength is significantly better than imported products.

MetInfo enterprise content manager system | MetInfo CMS

 

NFD's new high-strength carbon fiber reinforced composite plastic has excellent mechanical strength and impact resistance, high dimensional stability, and low warpage.

New formula improves material performance by 30%! Hepla® H9000-XCF series carbon fiber reinforced plastic based on high-temperature nylon, with bending stiffness exceeding 52GPa! Bending strength is up to 520MPa! The tensile strength is up to 360MPa! Hepla® H7200-XCF series based on PA66 has a tensile strength of up to 315MPa!

The outstanding mechanical properties of NFD carbon fiber composite plastic can easily replace most metals. The molded parts are 75% lighter than steel and 40% lighter than aluminum, which can provide a better solution for automobile lightweight and other industries. Program!

The following figure shows the comparison of the physical parameters of Hepla® H7230-XCF (high strength 30% carbon fiber) with the parameters of Hepla® H7230CF (30% carbon fiber) and Hepla® H7230GF (30% glass fiber).
 
Figure 1: Comparison of tensile strength of PA66 carbon fiber
图片关键词

Table 1: Comparison of PA66 carbon fiber reinforcement

Material model

Hepla® H7230GF

Hepla® H7230CF

Hepla® H7230-XCF

Density (g/cm3)

1.36

1.27

1.29

Tensile Strength   (MPa)

193

262

315

Tensile modulus   (Mpa)

9200

23000

28000

Bending strength  (Mpa)

270

340

520

Flexural modulus  (MPa)

8500

20000

24500

 
The following figure shows the comparison of the dynamic modulus changes of Hepla® H7230-XCF, Hepla® H7230CF, and Hepla® H7230GF as the temperature increases. Still has a higher modulus.
 
Figure 2: PPA carbon fiber tensile strength comparison chart
MetInfo enterprise content manager system | MetInfo CMS
 

Table 2: Comparison of PPA carbon fiber reinforcement

Material model

Hepla® H9030GF

Hepla® H9030CF

Hepla® H9030-XCF

Density (g/cm3)

1.4

1.33

1.34

Tensile Strength   (MPa)

215

283

350

Tensile modulus   (Mpa)

12500

26000

33000

Bending strength  (Mpa)

300

400

530

Flexural modulus  (MPa)

11500

22000

25500

MetInfo enterprise content manager system | MetInfo CMS

 

NFD high-strength carbon fiber reinforced plastic has successfully broken foreign monopolies, indicating that China has achieved cornering overtaking in carbon fiber composite materials, which is of great significance in the field of engineering plastics!

MetInfo enterprise content manager system | MetInfo CMS
 

Copyright © 2018 Jiangsu NFD Composites Co.,Ltd. 苏ICP备17051842号-1